Start by setting up pi-gen as described and ensure you are able to successfully build the base image. To use this project you must first install pi-gen, available at. Once it has rebooted you can access its web interface for a final login into your Plex account. Next, issue sudo systemctl enable plexamp and finally sudo reboot. It may take a couple of attempts to make it quit. Once it appears finished go ahead and stop Plexamp by issuing ctrl c. Wait for a bit to allow Plexamp to finish initializing. Once you have it, paste it into the terminal and press enter. Click or open the link in your browser, login into the site and get your claim code. You will be prompted to follow a link and enter a claim code. Once it is ready you can ssh into the Pi as mentioned above. Allow the system some time to resize the file system. Once you have copied the image to an SD card insert it into the Pi and start it up. There is some work you will need to perform manually to finish the setup. This currently the only method modifying the configuration of most services. You can now manage your system just like you normally would. Connect as pi to plexamp.local and login with plexamp. You can access the console of your Pi using an ssh client. Unlike a normal Raspberry Pi OS system, SSH is enabled by default. After some time the Pi will be online and ready to use. Once the image is copied to an SD card put it into your Raspberry Pi 3b+ or better and connect it to power and ethernet (WiFi works too if you pre-configured it using the headless configuration option). Simply download the latest image from the release page and copy it to an SD card in the usual way (detailed information is available at ). As mentioned in the announcement blog post, you can use this or. You will also need some kind of dac attached to the Pi. RequirementsĪs required by the Plexamp software, this is a 64bit image so you must be using a Pi 3 B+ or newer system. Looking to run Plex Media Server on a Pi? Try my other project. You can either build the image yourself or simply download a prebuilt image from the releases page. This feature is similar to Spotify or Tidal Connect. Once configured you will be able to use a Pi as a Plexamp player that you can control remotely. This repo contains routines to extend the base pi-gen system to build a custom Raspberry Pi OS image that contains a headless Plexamp implementation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |